‣ 5/8” Thick Clear finished Birch plywood
‣ Typically made to fit specified drawers
‣ If purchasing without drawer specify depth & width
‣ Minimum Depth: 16” Maximum: 24”
‣ Minimum Width of 12” applies for pricing purposes
‣ Pricing: $4.00 per width inch
Removable Cutlery Inserts
‣ 5/8”thick material
‣ No dovetails
‣ Flush inset bottom
min. outside width for letter = 14-1/2”
min. outside width for legal = 17-1/2”
min. height = 10-3/8”
Rails are inset to be flush with drawer height
The scale drawings below will detail why our drawer heights need to fall between X-1/8″ and X-3/8″ high. As illustrated heights ordered between X-3/8″ and the next whole inch will result in an exposing a dovetail cut.
Drawer heights outside the above parameters can be produced but would incur additional machine setup charges.
Front to Back
Side to Side
‣ 1” x 1/8” Aluminum rails are inset to be flush with drawer height. T
‣ File folder tabs may protrude above drawer height up to 5/8”.